Skip to content
Serving Fort Lauderdale and nearby cities Open 24 hours, 7 days a week · (561) 823-3201

Grasscloth Installation in Lauderdale Lakes Homes

The short answer

Grasscloth is a woven natural-fiber wallcovering that suits dry, air-conditioned rooms in Lauderdale Lakes homes. Success depends on a sound wall, a wallcovering primer, clean adhesive work and thoughtful roll order, which our Fort Lauderdale installers manage on every job.

Natural grasscloth gives a room depth that a printed paper cannot fake. The weave catches light, the color varies slightly across the surface, and the wall feels warm to look at. Homeowners in Lauderdale Lakes ask for it in living rooms, primary bedrooms and offices, often to soften a house with tile floors and hard, bright surfaces. It is a material that rewards an experienced installer and punishes shortcuts, so PrimeWall Interior Solutions treats it as its own specialty. Our team comes from Fort Lauderdale, about five miles to the east, and handles everything from wall testing and roll sequencing to the last trimmed edge.

What makes grasscloth different from regular wallpaper

Standard wallpaper is printed, so every roll matches the next. Grasscloth is made from strands of sisal, jute, hemp, seagrass or similar fibers laid side by side and glued to a paper backing. Because each batch of fiber absorbs dye a little differently, panels show subtle color shifts, and seams are visible by nature. Most designers and homeowners embrace that as part of the look.

The fibers are also absorbent. A drop of paste or water on the face can leave a dark spot that never fully disappears, and rubbing makes it worse. That is why installation technique matters more here than with almost any other wallcovering.

  • Panels are cut and hung in roll order, numbered on the back
  • Adhesive goes only on the backing, never on the fiber side
  • Seams are pressed with a clean, dry roller rather than a wet sponge
  • Trimming uses fresh blades so fibers cut clean instead of fraying

Choosing the right rooms in an inland Broward home

Lauderdale Lakes is far enough from the ocean that salt spray is not a daily concern, but the humidity is. The rainy months from May through October bring sticky air and afternoon downpours, and even the drier half of the year is humid compared with most of the country. Homes depend on air conditioning, and grasscloth does best where that AC keeps conditions steady.

Living rooms, dens, bedrooms and offices are ideal. Dining rooms work if they are not next to a kitchen that produces a lot of steam. Full bathrooms, laundry rooms and spaces with open patio doors much of the day are where we suggest woven-look vinyl instead. It gives a similar texture and holds up to moisture and cleaning.

Testing and prepping walls in block construction

Older homes in the city often have concrete-block exterior walls covered with plaster or drywall. During a stormy summer, moisture can move through block into the interior finish. Before any natural fiber goes on, we read the wall with a moisture meter, look for stains or flaking, and confirm the surface is dry.

Prep follows: fill holes, sand ridges, remove any loose paint, and roll on a pigmented wallcovering primer. A uniform primer color matters because thin grasscloth can let a patchy wall show through. On walls where the original surface is in rough shape, we may hang a liner paper first to create an even base.

Planning seams for a calm, even look

We unroll and inspect every roll in your room before cutting. Rolls that look noticeably different from the rest get assigned to less visible spots, such as behind a bookcase or above a door. On a single feature wall we usually center a panel so the seams fall evenly on each side. In a full room we start in the least visible corner so that the final panel, which may not match perfectly, lands where few people look.

Some products look smoother when every other panel is reversed top to bottom. We test that on your actual rolls and pick whichever arrangement reads most consistent.

Care tips and nearby service

Dust with a soft brush or vacuum attachment a few times a year. Keep furniture a little off the wall so fibers do not get crushed, and use window treatments on walls that get strong direct sun, since natural dyes fade. If a spot gets wet, blot gently and let it dry on its own.

We install grasscloth in Lauderdale Lakes as well as Lauderhill, Oakland Park, North Lauderdale, Wilton Manors and Margate.

More services in Lauderdale Lakes

Related

What to expect

How a visit goes

  1. Honest prep advice

    If a wall needs skim coating, crack repair or a moisture check first, we tell you before the job starts, not halfway through it.

  2. Pattern planned on purpose

    We decide where the first strip lands so the motif centers on a focal point and the least visible seam ends up in a corner.

  3. Climate-aware materials

    We help you pick papers and adhesives suited to humid bathrooms, salty coastal air and rooms where the AC cycles all day.

FAQ

Common questions

Don’t see your question? Call (561) 823-3201 and we’ll talk it through.

Can grasscloth handle South Florida humidity?

In air-conditioned living spaces, yes. It struggles in bathrooms, laundry rooms and spaces that stay open to the outdoors.

Why are the seams visible?

Natural fibers vary in shade and texture, so panel edges show. Careful roll ordering keeps the variation even across the wall.

Can grasscloth go over painted block walls?

Yes, once the wall is confirmed dry, smoothed and primed with a wallcovering primer.

How do I clean grasscloth?

Dust or vacuum it gently. Avoid water and cleaners; blot any spill immediately with a dry cloth.

How many rolls should I order?

We measure and give you a count that includes extra for shading choices and trimming, since grasscloth from a later batch may not match.

Tell us about the room you want to change

Send a few photos and the rough size of the walls, and we will talk through prep, paper options and timing for your home.

Call (561) 823-3201 Request Service