Skip to content
Serving Fort Lauderdale and nearby cities Open 24 hours, 7 days a week · (561) 823-3201

Wall Mural Installation in Coconut Creek

The short answer

Mural installation in Coconut Creek starts with exact wall measurements so the print is sized correctly, then smooth, primed walls and panel-by-panel hanging in order. Most single-wall murals are installed in one visit.

A printed mural turns a plain wall into a single continuous picture: a forest canopy over a nursery crib, a city skyline behind a desk, a soft watercolor wash across a dining room. Unlike repeating wallpaper, a mural has one correct position for every panel, so measuring and sequencing matter more than speed. PrimeWall Interior Solutions installs murals for Coconut Creek households in 33066 and 33073, a short drive up from our Fort Lauderdale base. Here is how a mural project goes from a photo of your empty wall to a finished image with matched seams.

Start with the measurements, not the image

Mural companies print to the size you give them, usually with a little bleed on each edge. If the width or height is off, the picture gets cropped in the wrong place or comes up short. We measure the wall at several heights and widths, because ceilings and corners in many homes are a bit out of square, and send you the numbers to use when you order.

We also note what will interrupt the image: outlets, a thermostat, a light switch, a window or a doorway. A face or a focal point that lands behind a switch plate is easy to avoid if you know in advance, and most mural sites let you shift the crop before printing.

  • Width and height taken at three points each
  • Locations of outlets, switches, vents and trim
  • Where furniture will sit, so key parts of the image stay visible
  • Ceiling height and any slope or soffit

Popular mural ideas in Coconut Creek homes

Families here ask for murals in kids' rooms more than anywhere else: jungle scenes, maps, night skies and simple pastel landscapes that can grow with a child. Home offices come next, since a mural behind the desk gives video calls a calm background. In living and dining rooms, people often go for large botanical prints, tropical leaves, or abstract washes in colors pulled from the furniture.

Many newer houses in the area have tall great-room walls. A mural can fill that height without the visual noise of a busy repeat, but it needs a print designed for the proportions. A landscape image stretched onto a tall wall loses its focus, so we talk through orientation before you buy.

Surface prep for a print that shows everything

Printed murals are thin and often matte, and they show texture under raking light from windows. Walls with knockdown or orange-peel finish get skim-coated and sanded smooth. Then we roll on a wallcovering primer, which helps the paste grab evenly and keeps removal clean if you change the room later.

Concrete-block exterior walls are common around Broward County, and they can carry moisture, especially through the wet months between May and October. We check those walls before hanging, since trapped moisture behind a mural can lead to bubbling or mildew.

Hanging the panels in order

Mural panels are numbered. We lay them out, confirm the sequence, and dry-fit the first two to check the image match. A plumb laser line sets the first panel, and each one after is matched to the picture, not to the wall edge. Excess bleed is trimmed at the ceiling, baseboard and corners only after the full image is aligned.

Self-adhesive murals and traditional paste-the-wall murals both come through our door. Peel-and-stick versions are tempting for renters, but they are less forgiving to hang and can lose grip in humid rooms. Paste-applied non-woven murals are generally the more durable option in South Florida.

After installation

Keep the room cool and the AC running while the paste cures over the next few days. Avoid pushing furniture tight against the mural until then. If a panel edge lifts slightly as it dries, let us know and we will re-seat it. We serve nearby Margate, North Lauderdale, Pompano Beach, Deerfield Beach and Lighthouse Point as well.

More services in Coconut Creek

Related

What to expect

How a visit goes

  1. Honest prep advice

    If a wall needs skim coating, crack repair or a moisture check first, we tell you before the job starts, not halfway through it.

  2. Pattern planned on purpose

    We decide where the first strip lands so the motif centers on a focal point and the least visible seam ends up in a corner.

  3. Climate-aware materials

    We help you pick papers and adhesives suited to humid bathrooms, salty coastal air and rooms where the AC cycles all day.

FAQ

Common questions

Don’t see your question? Call (561) 823-3201 and we’ll talk it through.

Where should I order my mural?

Any reputable mural printer works. We provide the measurements and can review the product type before you place the order.

Can a mural wrap around a corner?

Yes, but the image shifts slightly at the corner. We plan the break so faces and key details stay off the fold.

Is peel-and-stick fine for a kids' room?

It can be, on a smooth primed wall. For longer life in a humid climate, a paste-applied non-woven mural holds better.

How long does a mural take to install?

A single wall is usually done in one visit once the wall is smooth. Skim-coating a textured wall can add a day for drying.

Can a mural go on a ceiling?

Yes. Sky and star murals on nursery ceilings are a common request, and they need the same measuring and prep.

Tell us about the room you want to change

Send a few photos and the rough size of the walls, and we will talk through prep, paper options and timing for your home.

Request Service Call (561) 823-3201
Call (561) 823-3201 Request Service